Grease Line Cleaning in Sterling Heights, MI

Grease lines carry the heaviest organic load of any drain. Even with a grease trap, FOG accumulates on the pipe wall and hardens into a thick, sticky layer that progressively chokes the line. A cable auger only bores through it; the grease layer remains and the clog returns fast.

Hydro jetting is the standard for grease line cleaning because the high-pressure water emulsifies and flushes the grease entirely, leaving the pipe wall clean and the line at full diameter. Regular jetting keeps grease-heavy lines reliably clear.

The reason grease defeats ordinary clearing is physical. FOG goes down warm and liquid, then cools and solidifies onto the pipe wall, bonding around the full circumference like wax. A cable punched through the center reopens a narrow channel but leaves that bonded layer untouched, so the line re-narrows almost immediately. Grease also builds steadily rather than all at once, which means a line can be quietly losing capacity for weeks before a backup announces it — by which point the pipe is heavily coated end to end.

Hydro jetting addresses the whole problem: the jets cut the grease loose from the entire wall and flush it downstream, returning the line to its true diameter instead of a bored-out hole. For grease-heavy operations, the most cost-effective approach is a regular jetting interval rather than waiting for failure — staying ahead of the buildup is far cheaper than an emergency backup mid-service. We scope the right interval to your volume, coordinate with grease-trap maintenance, and keep the line reliably open.